Description of Goods
KTR Rotex Design Standard
● Torsionally Flexible,maintenance-free
● Damping vibrations
● Allover machining-good dynamic properties
● Compact desing/small flywheel effect
● Approved according to EC Standard 94/9/EC (without aluminium AL-D)
See Detail Design Standard PDF File
Description of Goods
KTR Rotex Design Standard Mat. Steel
● Hubs from steel,specifically suitable for drive elements subject to high loads,e. g. steel mills, elevator drives, spline hubs, etc.
● Torsionally flexible, maintenaance-free,vibration-damping
● Allover machining-good dynamic properties
● Compact desing/small flywheel effect
● Approved according to EC Standard 94/9/EC
See Detail Design Standard PDF File
Description of Goods
KTR Rotex Design A-H
● Assembly / disassembly by means of 4 screws only
● Exchange of spider with no need to shift the driving and driven driven side (motor and pump)
● Positive-locking and frictionally engaged hub combinations to be assembled radially (dimension E1 of design AFN = dimension E1 of A-H)
● Approved according to EC Standard 94/9/EC (type 7.8 shell clamping hub without feather key according to category 3)
See Detail Design Standard PDF File
Description of Goods
KTR Rotex Design CF, CFN, DF And DFN
● Flange designs applicable to heavy machinery
● CF and CFN - connection flange to shaft DF and DFN - double flange design for the connection of driving and driven machine,radial assembly possible without
removal of other components - quick replacement of spider
● CFN and DFN - particularly small outside diametrs
● DF and DFN - compact design
● DFN - for customer-specific mounting flanges
● Approved according to EC Standard 94/9/EC
See Detail Design Standard PDF File
Description of Goods
KTR Poly-Norm Design Standard
● Torsionally Flexible,reduces vibrations
● Maintenance - free
● Very short design
● Axial plug - in
● Approved according to EC Standard 94/9/EC (Explosion Certificate ATEX 95)
See Detail Design Standard PDF File
Description of Goods
KTR Poly-Norm Design ADR ( 3-Part )
● Torsionally Flexible,reduces vibrations
● Elastomer ring can be exchanged in assembled condition
● Maintenance - free
● Short design
● Approved according to EC Standard 94/9/EC (Explosion Certificate ATEX 95)
See Detail Design Standard PDF File
Description of Goods
KTR Bowex Gear Coupling Design Junior
● Curved - tooth gear coupling plug - in type (2 parts) from nylon
● Double cardanic curved - tooth gear coupling type M (3 parts) from nylon
● Maintenance - free due to material combination nylon
● Compensating for axial, radial and angular shaft misalignment
● Low weight and small flywheel effect
See Detail Design Standard PDF File
Description of Goods
KTR Bowex Gear Coupling Design M, I And M…C
● For all applications in the range of general engineering and hydraulics
● Maintenance - free due to material combination nylon/steel
● Compensating for axial, radial and angular shaft misalignment
● Axial plug - in - easy assembly
● Type M…C with carbon fiber reinforced PA low backlash, higher torques and approved according to EC Standard 94/9/EC(Explosion Certificate ATEX 95)
See Detail Design Standard PDF File
Description of Goods
KTR Radex - N Coupling Design Standard
● Standard Types available from stock
● Single and double cardanic designs
● Furthermore available with frictionally engaged shaft-hub -connection
● Finish bores according to ISO fit H7, feather keyway according to DIN 6885/1JS9
● Approved according to EC Standard 94/9/EC ( Explosion Certificate ATEX 95 )
See Detail Design Standard PDF File
Description of Goods
KTR Rotex GS Design Standard types
● Backlash - free shaft connections under prestress
● Small dimensions - low flywheel mass
● Maintenance - free,easy to check visually
● Various kinds of elastomer hardness of spiders
● Approved according to EC Standard 94/9/EC ( without feather key according to category 3 )
See Detail Design Standard PDF File
Description of Goods
KTR Rotex Design DKM
● For high shaft displacements, 3-part double-cardanic
● Reduced vibration and noise
● The restoring forces resulting from displacements are very low
● Increase of the total lifetime of all adjacent components
● Approved according to EC Standard 94/9/EC(Explosion Certificate ATEX 95)
● Double-cardanic design without the need for bearing support or external guarding
See Detail Design Standard PDF File
Description of Goods
KTR Clampex Design KTR 100 (not self-centering)
● Typical clamping set
● Axial fastening of the hub
● Torque factor
1 off 1 x T
2 off 1.9 x T
3 off 2.7 x T
4 off 3.6 x T
● KTR 114 for higher torques
See Detail Design Standard PDF File
Description of Goods
KTR Clampex Design KTR 200 (self-centering)
● Clamping element for universal use
● Wide range of applications
● Low-cost solution with average to high torques
● Mounting instructions under www.ktr.com
See Detail Design Standard PDF File
Description of Goods
KTR Clampex Design KTR 250 (self-centering)
● Clamping set specifically suitable for hubs with a small wall thickness
● Reduction of costs by saving material
● Short assembly times
● Small radial mounting dimensions
● Clamping sets " stainless steel " on request
See Detail Design Standard PDF File
Description of Goods
KTR Clampex Design KTR 400 (self-centering)
● Clamping set suitable for high loads
● Specifically suitable for vibratory torques
● Typical applications : flywheels, belf drums
● Torque factor
1 off 1 x T
2 off 1.9 x T
3 off 2.7 x T
4 off 3.6 x T
● KTR 402 for shaft Ø 320 mm to Ø 560 mm
See Detail Design Standard PDF File
Description of Goods
KTR Precision joints Design G and GD
● Suitable for every application in the range of general engineering up to a maximum speed of 10000 rpm
● Type G precision single joint
● Type GD precision double joint
● Maximum articulation angle 45º for each joint
● Bearings designed as plain bearings
● Available with finish bore H7-on request with keyway hexagon bore or square bore
● Also available as clamping hub
See Detail Design Standard PDF File
Description of Goods
KTR Precision joints Design H and HD
● Suitable for every application in the range of general engineering up to a maximum speed of 40000 rpm
● Type H precision single joint
● Type HD precision double joint
● Maximum articulation angle 45º
● High dynamic load-small bearing clearance
● Maintenance-free due to needle bearing
● Available with finish bore H7-on request with keyway hexagon bore or square bore
● Also available as clamping hub
See Detail Design Standard PDF File
Description of Goods
KTR Precision joints Design GA and HA
● Precision double joint-extendable, maximum articulation angle 45º for each joint
● Bridging of bigger shaft distances
● Type GA (plain bearing)n max. = 1000 rpm
● Type HA (needle bearing)n max. = 4000 rpm
● Available with quick locking GR:HR
● Available with finish bore H7-on request available with keyway, thread for square or hexagon bore
● Also available as clamping hub
See Detail Design Standard PDF File
Description of Goods
KTR Toolflex Design M with clamping hubs
● Backlash-free, torsionally stiff
● Maintenance-free
● Low mass moment of inertia
● Easy assembly due to tolerance F7
● Temperature range for size 5 to 12: -30 ºC to + 100 ºC Temperature range for size 16 to 20 : max.200 ºC
● Finish bore from Ø 6 mm also available with feather key acc.to DIN 6885
See Detail Design Standard PDF File
Description of Goods
Hydraulic Components
● Number 1 Bellhousing type PK/PL
● Number 2 Elastic flange
● Number 3 Damping ring design DT
● Number 4 Rotex Spider
● Number 5 Rotex coupling hub, motor side
● Number 7 Foot flange type PTFS (VDMA 24 561 part 1)
● Number 8 Damping rod design DSFS for foot flange type PTFS
● Number 10 Bellhousing PIK with integrated oil cooler
● Number 11 Fan for PIK
● Number 18 Damping ring type D
● Number 26 Horizontally mounted cooler TAK
● Number 28 OPC Cooling-pump-unit with hydraulic pump filter
● Number 29 PAC-Oil/air coller